Description
The ASTATIC 901R is a superior low noise, electret condenser cardioid surface mounted boundary microphone. It has been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones with
The 901R's electronics features an advanced transformerless design and is
The die cast zinc base and double layer perforated steel screen construction makes this microphone extremely rugged. The 901R can also be permanently mounted on most flat surfaces with the supplied wood screws. The 901R comes with 30 feet of high quality microphone cable that has a miniature 3 pin connector on the microphone end and a standard professional XLR type connector on the opposite end. The 901R will operate with any equipment that supplies standard P12, P24 and P48 volt phantom power.
901R
ELECTRET CONDENSER BOUNDARY MICROPHONE
ASTATIC Quality
All 901R microphones are audio tested and inspected prior to shipment. Our absolute commitment to quality insures that ASTATIC microphones remain the Best Value in today's competitive industry.
Operation and Maintenance
The 901R is one of the finest boundary microphones available.
If the mic body becomes soiled by dirt or residue, it may be cleaned using the following procedure. Remove the top screw and lift off the top screen and remove the foam windscreen. Wash the foam windscreen using a mild detergent, and let dry thoroughly. To clean the mic housing, use a cloth dampened with isopropyl alcohol.