ASSEMBLY
BREAKING IN THE PUMP
See Figures 6 - 9.
Check and tighten all bolts, fittings, etc.
Turn the pressure regulator knob fully clockwise to open the air flow.
Place the lever of the pressure switch in ‘OFF’ position and plug in the power cord.
Open the drain valve completely.
Place the lever of the pressure switch in ‘AUTO’ position and run the air compressor for 10 minutes to break in pump parts.
Place the lever of the pressure switch in ‘OFF’ position. Close the drain valve.
PRESSURE SWITCH | PRESSURE |
| ||
(ON/OFF) | REGULATOR KNOB |
| ||
|
|
| QUICK |
|
|
| COUPLER |
| |
SAFETY |
|
|
|
|
VALVE |
|
|
|
|
TANK | REGULATOR |
|
| |
PRESSURE |
|
| ||
Fig. 6 |
| |||
GAUGE | PRESSURE |
|
| |
| GAUGE |
|
|
|
LEVER
IN ‘OFF’
POSITION
Fig. 7
LEVER
IN ‘AUTO’
POSITION
Fig. 8
DRAIN VALVE |
| Fig. 9 |
|
|
|
13
