|
| 8077SE | LARGE VIEWING AREA DELUXE |
| |||
|
|
|
| ||||
|
|
| SOLAR WELDING HELMET AND WELDING GLOVES |
| |||
|
|
|
|
|
| ||
MAINTENANCE INSTRUCTIONS |
|
|
|
| |||
|
|
|
| ||||
|
|
|
| ||||
|
|
|
| ||||
• REPLACING FRONT COVER LENS. Replacing the front | Before using the helmet for welding ensure you | ||||||
cover lens if it is damaged (cracked, scratched, soiled or pitted). | have read and understood the safety instructions | ||||||
See fig.4 |
|
|
|
|
| ||
• CHANGING BATTERY. If | "Low battery" alarm light is red, | COMMON PROBLEMS AND REMEDIES | |||||
please change it with new battery. | |||||||
|
|
|
| ||||
• CLEANING. Clean helmet by wiping with a soft cloth. Clean | Irregular Darkening Dimming | ||||||
cartridge surfaces regularly. Do not use strong cleaning solutions. | • Headband has been set unevenly and there is an uneven | ||||||
Clean sensors and solar cells with methylated spirit and a clean | |||||||
distance from the eyes to the filter's lens (Reset headband to | |||||||
cloth and wipe dry with a | |||||||
reduce the difference to filter). | |||||||
|
|
| |||||
• PLEASE ADJUST THE SENSITIVITY TO THE LOWEST |
| ||||||
LEVEL WHEN YOU ARE NOT WORKING. | |||||||
|
|
| • Front cover lens is soiled or damaged (change lens cover) | ||||
|
|
| • Sensors are soiled (clean the sensors' surface) | ||||
|
|
| • Welding current is too low (turns the switch to the "slow" | ||||
|
|
| position). | ||||
|
|
| Slow Response | ||||
|
|
| • Operating temperature is too low (do not use at temperatures | ||||
|
|
| below - 10｡C or 14｡F). | ||||
|
|
| Poor Vision | ||||
| fig.4 | fig.4a | • Front /inside cover lens and/or filter lens are soiled | ||||
| (change lens) | ||||||
|
|
| |||||
|
|
| • There is insufficient ambient light | ||||
|
|
| • Shade number is incorrectly set (reset the shade number) | ||||
|
|
|
|
|
|
| |
TECHNICAL SPECIFICATIONS
Viewing Area: | 96 x 62 mm (3.8"x2.4") |
Cartridge Size: | 110 x 106 x 9mm (4.3"x4.2"x0.35") |
Arc Sensor: | 2 |
Light State: | Shade DIN 3.5 |
Variable Shade: | From DIN 9 to DIN 13 |
Shade Control: | External adjustable |
Power On/Off: | Fully Automatic |
Sensitivity Control: | Be adjustable by dial knob |
UV/IR Protection: | Up To Shade DIN16 at all time |
Power Supply: | Solar cell, battery can be changed (3V lithium) |
Battery Lifetime: | Over 4000hours before low battery alarming |
Switching Time: | 1/20,000 s. from Light to Dark |
Dark to Light: | 0.1~1.0s by dial control knob |
Operating Tep.: | - 1 0｡ C ~ + 55｡ C |
Storing Temperature: | - 20｡ C ~ + 70｡ C |
Helmet Material: | |
| Polyamide Nylon |
Total Weight: | 475g |
Welding Helmet Slips
•Headband is not adjusted properly (readjust headband)
User must stop using the
3
