English

Introduction

The GigaX 1124 rack-mountable switch provides non-blocking, wire-speed performance to meet your intensive network demands. The switch features MDI/MDIX Ethernet ports with auto-sensing capability to automatically detect the cables attached to them and adjust the speed of data exchange. This plug-and-play function requires no configuration, making the switch easy to install and maintain.

The switch also manages congestion and prioritizes traffic with flow control schemes and Quality of Service (QoS) ability, thus enhancing your network’s efficiency.

Features

(24) 10/100/1000 Mbps RJ-45 ports

Plug and play – automatic MDI/MDIX and auto-sensing for speed and duplex mode on all ports

Surface or rackmount placement options

Flow control schemes (802.3x in full-duplex mode) to support zero loss under temporary network congestion

Backpressure support for 10/100 Mbps half duplex

Advanced QoS support

4K Media Access Control (MAC) addressing with learning and aging feature that allows concurrent connections to 4K nodes

Up to 2 Gbps for all ports in full-duplex mode

Easy-to-read LEDs for quick indication of link status, activities, speed and duplex mode on all ports

Built-in Virtual Cable Tester (VCT) feature

10KB jumbo frame support

Package contents

Before installing the switch, check your package for the following items:

GigaX 1124 switch

Power cable

Mounting kit (two brackets and six screws)

Quick installation guide

NOTE. Contact your retailer if any item is damaged or missing.

2

ASUS GigaX 1124