2.3Detaching the arm/base (only for 27T1EH) (For VESA wall mount)
The detachable arm/base of this LED monitor is specially designed for VESA wall mount.
To detach the arm/base:
1.Have the front of monitor face down on a table.
2.Remove the rubbers in the four screw holes (figure 1).
3.Remove the base (figure 2).
4.Pry the rear hinge cover (figure 3).
5.Use a screwdriver to remove the four screws on the hinge (figure 4), then remove the hinge.
Figure 1 | Figure 2 |
Figure 3 | Figure 4 |
We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
10 | ASUS LED TV Monitor T1 Series |
