6.Carefully insert the optical drive into the bay, then push it inward until it is completely flushed into the chassis.

7.Align the screw holes as shown.

8.Press down the drive bay lock to secure the optical drive to the chassis.

9.Connect a 40-pin IDE cable to

the IDE connector at the back of

the drive then connect the other9 10 end to the IDE connector on the

motherboard.

Refer to the motherboard user guide for the location of the IDE connector.

10.Connect a 4-pin power plug from

the power supply unit to the power connector at the back of the drive.

2 - 12

Chapter 2: Basic installation