3. HARDWARE SETUP

Multiplier Table

6

7

8

9

12.5x and up

[OFF]

[OFF]

[ON]

[ON]

 

 

 

 

 

12.0x

[ON]

[OFF]

[ON]

[ON]

11.5x

[OFF]

[ON]

[ON]

[ON]

 

 

 

 

 

11.0x

[ON]

[ON]

[ON]

[ON]

10.5x

[OFF]

[OFF]

[OFF]

[OFF]

 

 

 

 

 

10.0x

[ON]

[OFF]

[OFF]

[OFF]

9.5x

[OFF]

[ON]

[OFF]

[OFF]

 

 

 

 

 

9.0x

[ON]

[ON]

[OFF]

[OFF]

8.5x

[OFF]

[OFF]

[ON]

[OFF]

 

 

 

 

 

8.0x

[ON]

[OFF]

[ON]

[OFF]

7.5x

[OFF]

[ON]

[ON]

[OFF]

 

 

 

 

 

7.0x

[ON]

[ON]

[ON]

[OFF]

6.5x

[OFF]

[OFF]

[OFF]

[ON]

 

 

 

 

 

6.0x

[ON]

[OFF]

[OFF]

[ON]

5.5x

[OFF]

[ON]

[OFF]

[ON]

 

 

 

 

 

5.0x

[ON]

[ON]

[OFF]

[ON]

 

 

 

 

 

6)Bass Center Setting (BCS1, BCS2)(NOTE: Only available on PCB 1.10 & later versions)

Use these jumpers in conjunction with the C-Media PCI Audio Driver to adjust output for 6 speaker audio. No audio standard exists for the three pick-up surfaces on male audio jacks, therefore it may be necessary to switch jumpers from the default position to reroute signals among the internal leads to the female Line-In, Line-Out, Mic sockets. Make sure a test is made using the C-Media Audio Driver software setup available on the Support CD. These jump- ers effectively swap the audio channels for bass and center. NOTE: the default setting is compatible with Creative 6-Channel audio speaker system.

2 3

 

1

2

 

 

 

 

A7A266-E

BCS1BCS2

(BASS/CENTER) (CENTER/BASS) (Default)

A7A266-E Jumper Mode Setting

ASUS A7A266-E User’s Manual

21