.3 H/WConnectors SETUP

3.HARDWARE SETUP

12)Wake-On-LAN Connector (3-pin WOL_CON)

This connector supports a LAN card with a Wake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that the Wake-On-LAN or PCI Modem feature is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power.

WOL_CON

A7A266-E

Ground

PME +5 Volt Standby

A7A266-E Wake-On-LAN Connector

13)Wake-On-Ring Connector (2-pin WOR)

This connector supports internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port.

IMPORTANT: This feature requires that the Wake-On-LAN or PCI Modem feature is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

WOR

A7A266-E

1 2

RI# Ground

A7A266-E Wake-On-Ring Connector

34

ASUS A7A266-E User’s Manual