Asus A7A266-E ASUS A7A266-EUser’s Manual, 21)ATX Power Supply Connector (20-pinblock ATXPWR), 22)Power Supply Thermal Sensor Connector (2-pinblock JTPWR)

3.HARDWARE SETUP

21)ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power supply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least 10mA on the +5-volt standby lead (+5VSB). You may experience difficulty in powering ON your system if your power supply cannot support the load. For Wake-On- LAN support, your ATX power supply must supply at least 720mA +5VSB.

	+12.0Volts	+5.0 Volts
	+5V Standby	+5.0 Volts
	Power Good	-5.0 Volts
	Ground	Ground
	+5.0 Volts	Ground
	Ground	Ground
	+5.0 Volts	Power Supply On
A7A266-E	Ground	Ground
	+3.3 Volts	-12.0Volts
	+3.3 Volts	+3.3Volts

A7A266-E ATX Power Connector

22)Power Supply Thermal Sensor Connector (2-pin block JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector.

JTPWR

Power Supply

Thermal Sensor

A7A266-E

A7A266-E Thermal Sensor Connector

Connectors

3. H/W SETUP

ASUS A7A266-E User’s Manual 39