SETUP H/W .3

Settings Motherboard

2)CPU / FSB Frequency Selection (JF)

The JF jumper is set to a default that operates with AMD 133 FSB capacity processors. The factory default is set to run the FSB at 133 MHz and the JF jumper is preset to [2-3] and all DSW (SW1) switches are preset to OFF. If AMD 100 MHz capacity processors are used, then reset the JF jumper to [1-2] and change the DSW (SW1) switches to the 100 MHz setting shown below. If the JF and switch settings do not match the capacity of the processor, the motherboard may not boot up.

 

JF

 

1

2

2

3

 

133MHz 100MHz

(Default)

A7VL133-VM

A7VL133-VM CPU/FSB Setting (JF)

18

ASUS A7VL133-VM User’s Manual