Take note of the following precautions before you install motherboard components or change any motherboard settings.
¥Unplug the power cord from the wall socket before touching any
component.
¥Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity
¥Hold components by the edges to avoid touching the ICs on them.
¥Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
¥Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.
Onboard LEDs
The motherboard comes with a green standby power LED that lights up to indicate that the system is ON, in sleep mode, or in
The red warning LED lights up when you installed two graphics cards but did not connect the ASUS EZ Plug™. The illustration below shows the location of the onboard LEDs.
SLI_WARN_LED
| ON | OFF |
| When use 2 Graphics | When use 2 Graphics |
| but do not plug | but do plug |
|
| |
| SB_PWR | |
| ON | OFF |
Standby | Powered | |
Power | Off | |
1 - 2 | Chapter 1: Hardware information |