2.6.3Boot settings configuration

Boot Settings Configuration

Case Open Warning

[Disabled]

Quick Boot

[Enabled]

Boot Up Floppy Seek

[Enabled]

Bootup Num-Lock

[On]

OS Select for DRAM > 64MB

[Non-OS2]

Full Screen Logo

[Enabled]

Halt On

[No Errors]

Select Menu

Item Specific Help

Press [Enter] to enable or disable.

Case Open Warning [Enabled]

Enables or disables the chassis open status feature. Setting to Enabled, clears the chassis open status. Refer to section “2.7 Internal connectors” for setting details. Configuration options: [Disabled] [Enabled]

Quick Boot [Enabled]

Setting to [Enabled] allows the system to skip certain tests while booting, decreasing the time needed to boot the system.

Configuration options: [Disabled] [Enabled]

Boot Up Floppy Seek [Enabled]

When [Enabled], the BIOS will seek the floppy disk drive to determine whether the drive has 40 or 80 tracks. Configuration options: [Disabled] [Enabled]

Bootup Num-Lock [On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]

OS Select for DRAM > 64MB [Non-OS2]

Select [OS2] only when you are using an OS2 operating system with greater than 64MB RAM; otherwise, set to [Non-OS2]. Configuration options: [Non-OS2] [OS2]

2 - 34

Chapter 2: BIOS setup