6 . USB connectors (10-1 pin USB78, USB56, USB910)

These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

A8N-SLI

A8N-SLI

USB 2.0 connectors

USB+5V USB P8- USB P8+ GND NC

USB+5V USB P6- USB P6+ GND NC

USB+5V USB P10- USB P10 + GND NC

USB78

USB56

USB910

1

1

1

USB+5V USB_P7- USB_P7+ GND

USB+5V USB_P5- USB_P5+ GND

USB+5V USB_P9- USB_P9+ GND

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

7 . IEEE 1394a connector (10-1 pin IE_1394_2)

This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable to this connector, then install the module to a slot opening at the back of the system chassis.

A8N-SLI

A8N-SLI IEEE 1394 connector

+12V

TPB1+ GND TPA1+

1

 

 

IE_1394_2

 

 

GND +12V

TPB1- GND TPA1-

 

NEVER connect a USB cable to the IEEE 1394a connector. Doing so will damage the motherboard!

1 - 24

Chapter 1: Hardware information