MTRR mapping mode [Continuous]

Sets the MTRR mapping mode.

Configuration options: [Continuous] [Discrete]

Errata 94 Enhanced [Auto]

Configuration options: [Auto] [Disabled]

2.4.3PCIPnP

The items in this menu show the PCIPnP configuration settings. Select an item then press <Enter> to display a pop-up menu with the configuration options.

PCIPnP

 

Plug & Play O/S

[Yes]

Init Display First

[PCIEx]

Resources Controlled By

[Auto]

x IRQ Resources

 

PCI/VGA Palette Snoop

[Disabled]

Select Menu

Item Specific Help

Select Yes if you are using a Plug and Play-capable operating system. Select No if you need the BIOS to configure non-boot devices.

Plug & Play OS [Yes]

Select [Yes] if you are using a Plug and Play capable operating system. Select [No] if you need the BIOS to configure non-boot devices. Configuration options: [No] [Yes]

Init Display First [PCIEx]

Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI slot] [PCIEx]

Resources Controlled By [Auto

When set to [Auto(ESCD)], this allows the BIOS to automatically configure all the boot and Plug and Play devices. When set to [Manual], you can assign the available IRQ resources to the PCI devices.

Configuration options: [Auto] [Manual]

2 - 20

Chapter 2: BIOS setup