• For a fully-configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 400 W.

•Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up.

•The ATX 12 V Specification 2.0 compliant (400 W) PSU has been tested to support the below configuration:

CPU:

AMD FX-57

Memory:

512 MB DDR (x4)

Graphics card:

PCI Express x16 ATI X850

Hard disk:

SATA HD (x2)

ATAPI:

CD-ROM (x1)

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•If you want to use the ATI CrossFire™ Graphics solution, use a PSU with 500 ~ 600 W power to ensure system stability.

8 . GAME/MIDI port connector (16-1 pin GAME)

This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files.

GAME

A8R32-MVP DELUXE

A8R32-MVP DELUXE Game connector

+5V MIDI_IN J1B2 J2B2 J1CY J2CY GND MIDI_OUT GND J2CX J1CX J2B1 J1B1 +5V +5V

2 - 28

Chapter 2: Hardware information