Chassis fan cable

2.7Removable components

When installing or removing system devices, you may need to remove previously installed components. This section describes how to remove these components.

2.7.1 Chassis fan

To remove the 12-cm chassis fan:

1.Disconnect the 3-pin fan cable from the connector on the motherboard.

2.Use a flat screwdriver to push the pin locks on the four corners of the

fan from the inside of the chassis.

Pin lock (tail-end)

3.Pull out the pin locks from the rear panel.

4.Remove the chassis fan.

Pin lock

ASUS AK34 chassis kit

2-19