II. System Components
Motherboard Mounting
Once the stabilizing link bar is removed, you can install or replace the moth- erboard but note the screw locations. All screws are necessary to provide the needed stabilization to support all the motherboard expansion items.
NOTE: The screw locations will vary with different motherboards.Components .II
Panel / Motherboard
Motherboard screw locations
Panel Connections
Several wires should be connected to the motherboard for the IDE/SCSI activity, power, and message indicators on the front panel. Panel connections also allow for an ATX power button, reset switch, and speaker. Connect the chassis front panel wires as illustrated:
|
| Red (+) | |
Button Cell Battery |
| H.D.D. LED | |
| White | ||
for motherboard |
| ||
BIOS and clock |
| White (+) | |
|
| ||
|
| Speaker | |
White | Red | Black | |
|
| ||
Black | White | Violet (+) | |
Reset SW | |||
|
| ||
| Violet | White | |
|
| ||
White | Black | Red (+) | |
Chassis Panel | Red | Power SW | |
| |||
Connectors |
| Black | |
White | White | Yellow (+) | |
Turbo LED | |||
|
| ||
| Yellow | White | |
|
| ||
Green |
| Green (+) | |
|
| ||
|
| Power LED | |
Connector for Optional Infrared Module |
| White | |
|
|
Motherboard panel connector
16 | AP100 Hardware Reference Guide |