II. System Components
Front Panel
The front panel needs to be removed to install or remove the device cage covers for installing or removing devices mounted in the device cages. You can remove the front panel either in the upright position or flat on its right panel. Lean the front panel over the edge of a table or book if working upright. Reach your fingers up into the front panel and pull the front panel away from the chassis.
Components | Front Panel |
II. |
|
Four of your fingers should fit behind the front panel
Removing the front panel
Device Bay Covers
With the front panel removed, the device bay covers can be removed or installed.
Device Bay Removal Procedure:
1.With your thumb, push the tab out- ward against the side of the front panel.
2.With your other hand, push the device cage cover inward from the front side.
Device bay cover tab
Front panel backside
AP100 Hardware Reference Guide | 17 |