I. Introduction

The AP200 Hardware Reference Guide provides information and procedures on the various components used in this server. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. You should also read all documentation and manuals included with this server and with your separately purchased components.

1-1. Sections

There are only a few sections in this reference guide as follows:

I. Introduction

This section gives general information and features for this server.

II. Components

This is the main section which gives descriptions of each server component.

III. Getting Started

This section gives information on getting started with this server.

IV. Hardware Setup

This section gives information on setting up the server.

IV. Appendix

This section gives you additional information to help plan your server.

1-2. Component Checklist

Some components shown in this reference guide are optional and may be individually purchased to complete this server. The following checklist provides a guideline as to the necessary components for a server.

Standard components

Chassis:

ASUS AS-10 Tower

Power Supply:

250W ATX

Motherboard:

ASUS P2B-DS/P2B-D

CD-ROM Drive:

ASUS 40X

Floppy Drive:

1.44MB

Cables:

Power, IDE, floppy, 50- & 68-pin SCSI, CD audio cables

SCSI Terminator:

Terminators for 68-pin Ultra2 SCSI cables

User’s Manuals:

CD-ROM, SCSI, Motherboard

Drivers/Utilities:

SCSI, CD-ROM, Motherboard

ASUS RAID Card Solutions (you may purchase from ASUS)

PCI-DA2100A:

Ultra-Wide SCSI dual-channel RAID card

PCI-DA2200A:

Ultra2 SCSI single-channel RAID card

PCI-DA2200B:

Ultra2 SCSI dual-channel RAID card

I. Introduction

Sections / Checklist

 

 

AP200 Hardware Reference Guide

7