Asus AP200 4-1.Chassis, Removing the Left Panel, Installing the Left Panel, Left Panel Removal Procedure:, AP200 Hardware Reference Guide

IV. Hardware Setup

4-1. Chassis

Removing the Left Panel

The left panel needs to be removed to gain access to the internal system.

Left Panel Removal Procedure:

1.Remove the padlock if one is used on the left panel.

2.Remove the thumb screw on the back of the left panel.

3.Pull the left panel away from the chassis from the back.

4.Pull the bottom of the left panel outward from the bottom.

Thumb Screw

Location

Pulling the Left Panel Backward	Pulling the Bottom of the Left Panel
(Step 3)	(Step 4)

Installing the Left Panel

Left Panel Installation Procedure:

1.Hang the left panel on the hooks by the edge of the top panel. When hooked, the left panel is still about 1.5cm away from the front panel.

2.Push the bottom of the left panel inward.

3.Slide the left panel towards the front panel.

To protect the server chassis from unauthorized intrusion, you may lock the left panel with a padlock.

HW Setup	Chassis
IV.

AP200 Hardware Reference Guide 17