Asus AP200 4-2.Motherboard, Stabilizing Link Bar, Motherboard Screws

IV. Hardware Setup

Stabilizing Link Bar

The stabilizing link bar needs to be removed in order to access the mother- board or remove the 3.5” device cage. To remove the stabilizing link bar, grasp the bar at the back end with the right hand and with the right thumb press the back of the chassis towards your fingers (or using the palm of your left hand, press on the back of the chassis). The bar then releases from the latch and swings outward.

Grab here and pull the bar outward.

Press here with your thumb or other hand.

Chassis Side Interior

4-2. Motherboard

Read the motherboard User’s Manual for details.

Motherboard Screws

Screw the motherboard as circled. Be

careful not to overtighten the screws. Doing so may damage your motherboard.

Motherboard

IV. HW Setup

Motherboard in the Chassis

AP200 Hardware Reference Guide 19