3. Keyboard power (3-pi n KBPWR)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least

500 mA on the +5VSB lead, and a corresponding setting in the BIOS.

KBPWR

 

3

2

2

1

 

+5V +5VSB (Default)

Fan connectors4.4Connectors1. Fl oppy di sk dri ve connector (34-1 pi n FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.

FLOPPY

NOTE:Orient the red markings on the floppy ribbon cable to PIN1.

PIN1

Floppy disk drive connector

4-

Chapter 4: Motherboard info