5.4.3 Chi pset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

Advanced Chipset Settings

Warning: Setting wrong values in below sections may cause system to malfunction.

Memory Controller

AGP Bridge K8M890 AGP/PCI EXPRESS Configuration

SouthBridge VIA VI8237A Configuration Hyper Transport Configuration

NorthBridge Configuration

Memory Controller

 

Memory Configuration

 

ECC

Configuration

 

Power

Down Control

[Auto]

Alternate VID

[0.850V]

Memory CLK

:333 MHz

CAS

Latency(Tcl)

:5.0

RAS/CAS Delay(Trcd)

:5 CLK

Min

Active RAS(Tras)

:15 CLK

Row

Precharge Time(Trp)

:5 CLK

RAS/RAS Delay(Trrd)

:3 CLK

Row

Cycle (Trc)

:21 CLK

Asynchronous Latency

:6 ns

Memory Configuration

Memory Configuration

 

Memclock Mode

[Auto]

MCT Timing Mode

[Auto]

Bank Interleaving

[Auto]

Enable Clock to All DIMMs

[Disabled]

MemClk Tristate C3/ATLVID

[Disabled]

Memory Hole Remapping

[Disabled]

 

 

Memclock Mode [Auto]

Allows you to set the memory clock mode.Set by the code using [Auto] or select [Manual] to set using one of the standard values. Configuration options: [Auto] [Manual] [Limit]

ASUS V-Series M2V890

5-17