Advanced PCI/PnP Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

 

Plug And Play O/S

[No]

PCI Latency Timer

[64]

Allocate IRQ to PCI VGA

[Yes]

Palette Snooping

[Disabled]

IRQ-3 assigned to

[PCI Device]

IRQ-4

assigned to

[PCI Device]

IRQ-5

assigned to

[PCI Device]

IRQ-7

assigned to

[PCI Device]

IRQ-9

assigned to

[PCI Device]

IRQ-10

assigned to

[PCI Device]

IRQ-11

assigned to

[PCI Device]

IRQ-14

assigned to

[PCI Device]

IRQ-15

assigned to

[PCI Device]

NO: Lets the BIOS configure all the devices in the system. YES: Lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system.

Pl ug and Pl ay O/S [ No]

When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot.

Configuration options: [No] [Yes]

PCI Latency Ti mer [ 64]

Allows you to select the value in units of PCI clocks for the PCI device latency timer register. Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]

All ocate I RQ to PCI VGA [ Yes]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested. Configuration options: [No] [Yes]

Pal ette Snoopi ng [ Di sabl ed]

When set to [Enabled], the pallete snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly. Configuration options: [Disabled] [Enabled]

I RQ xx [ Avail abl e]

When set to [Available], the specific IRQ is free for PCI/PnP devices to use. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [Available] [Reserved]

ASUS V-Series M2V890

5-23