.3

H/WConnectors

SETUP

3.HARDWARE SETUP

16)ATX Power Supply Connector (20-pin block ATXPWR)

This connector connects to an ATX power supply. The plug from the power sup- ply will only insert in one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned.

IMPORTANT: Make sure that your ATX power supply can supply at least 10mA on the +5-volt standby lead (+5VSB). You may experience difficulty in powering ON your system if your power supply cannot support the load. For Wake- On-LAN support, your ATX power supply must supply at least 720mA +5VSB.

 

+5.0 Volts

+5.0 Volts

-5.0 Volts

Ground

Ground

Ground

Power Supply On

Ground

-12.0 Volts

+3.3 Volts

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATXPWR

VoltsStandbyGoodGroundVoltsGroundVoltsGroundVoltsVolts

+12.0+5VPower+5.0+5.0+3.3+3.3

CUBX-L/CUBX-E ATX Power Connector

17)Power Supply Thermal Sensor Connector (2-pin block JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector.

JTPWR

Power Supply Thermal Sensor Connector

CUBX-L/CUBX-E Thermal Sensor Connector

38

ASUS CUBX-L/CUBX-E User’s Manual