5.SOFTWARE SETUP

5.1Install Operating System

You should always use the latest operating system and updates when using new hardware to ensure full compliancy. You may use any version of Windows 98, but for Windows 95, you must use OSR 2.0 or later. For Windows NT 4.0, you must use Service Pack 3.0 or later.

5.2 Start Windows

When you start Windows 98 for the first time after installing your motherboard, Windows will detect all plug-and play devices. Follow the Add New Hardware Wizard to install all necessary device drivers. When prompted to restart, select No and then follow the setup procedures in this section.

NOTE: Because there are various motherboard settings, options, and expansion cards, the following can only be used as a general reference and may not be an exact reflection of your system.

5.3 Installing Drivers and Software

5.3.1 PCI RAID Controller Found

(only on model with onboard ATA100 IDE controller) Insert the provided floppy disk into your floppy disk drive.

(1) Click here.

(2) Click here.

(3)Select Floppy disk drives and then click here.

Follow the online instructions to finish installation.

5. S/W SETUP

Windows 98

ASUS CUBX-L/CUBX-E User’s Manual

75