Asus CUSL2-C JEN, Setting, 4.4 Advanced Menu, 1) JumperFree™ Mode (JEN), Motherboard Feature Settings, [1-2], [2-3](default), Disable (Jumper)

Settings Motherboard

SETUP H/W .3

3. HARDWARE SETUP

Motherboard Feature Settings

The motherboard’s onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch’s posi- tion. The example below shows all the switches in the OFF position.

	DSW	5
		4
		3
	ON	1 2
	ON	OFF
	1. Frequency Selection
	2. Frequency Selection
CUSL2-C BP	3. Frequency Selection
	4. Frequency Selection
CUSL2-C BP DIP Switches	5. Frequency Selection.

1) JumperFree™ Mode (JEN)

This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).

NOTE: In JumperFree™ mode, all dip switches must be set to OFF.

Setting	JEN
Disable (Jumper)	[1-2]
Enable (JumperFree)	[2-3] (default)
		DSW
				5
				4
				3
			ON	1 2
				OFF
			JEN
CUSL2-C BP		Disable		Enable(default)
CUSL2-C BP JumperFree™		1	2	2	3
Mode Setting

20 ASUS CUSL2-C Black PearlUser’s Manual