Connectors

.3 SETUP H/W

3.HARDWARE SETUP

18)USB Headers (5-pin USB2, 5-pin USB56)

If the USB ports on the back panels are inadequate, two USB headers are avail- able for two additional USB ports. Connect the 5-pin ribbon cables from the provided 2-port USB connector set to the two midboard 5-pin USB headers and mount the USB connector set to an open slot on your chassis.

USBPWR

USBP2- USBP2+ GND

USB2

1

USBP5+-USBPWR

GNDUSBP5

CUSL2-C BP

USB56

CUSL2-C BP USB Headers

19)Power Supply Thermal Sensor Connector (2-pin JTPWR)

If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector.

CUSL2-C BP

JTPWR

Power Supply Thermal Sensor

CUSL2-C BP Thermal Sensor Connector

40

ASUS CUSL2-C Black PearlUser’s Manual