Menu | Description | |
Configure | Allows you to create RAID 0, RAID 1 or RAID 10 set using the Easy |
|
| Configuration or the New Configuration command. This menu also | |
| allows you to view, add, or clear RAID configurations or select the | |
| boot drive | |
Initialize | Allows you to initialize the logical drives of a created RAID set |
|
Objects | Allows you to initialize logical drives or change the logical drive |
|
| parameters | |
Rebuild | Allows you to rebuild failed drives |
|
Check Consistency | Allows you to check the data consistency of the logical drives of a |
|
| created RAID set | |
5.2.1Creating a RAID 0 or RAID 1 set
The LSI Software RAID Configuration Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1.From the utility main menu, highlight Configure, then press <Enter>.
2.Use the arrow keys to select Easy Configuration, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Configuration Menu
Easy Configuration
Management MenuNew Configuration
Configure View/Add Configuration
Initialize |
| Clear Configuration | ||
Objects |
| Select Boot Drive | ||
Rebuild |
|
|
|
|
Check Consistency |
|
| ||
|
|
|
|
|
Defines Physical Arrays. An Array Will Automatically Become A VD
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Chapter 5: RAID configuration |