Problem |
| Action |
If the ADSL “LINK” light | • Ensure that all your cables are all properly | |
blinks continuously or | connected . |
|
stays off, Internet access |
|
|
is not possible - the Router | • Disconnect the power cord from the ADSL | |
is unable to establish a | ||
connection with the ADSL | or cable modem, wait a few minutes, then | |
network. | reconnect the cord. | |
| • If the ADSL light continues to blink or stays | |
| OFF, contact your ADSL service provider. | |
Network name or encryption | • Try setting up the wired connection and | |
keys are forgotten | configuring the wireless encryption again. | |
| • Press the Restore button at the rear panel | |
| of the wireless router for more than five | |
| seconds. |
|
How to restore the system | • Press the Restore button at the rear panel | |
to its default settings | of the wireless router for more than five | |
| seconds. |
|
| The following are the factory default settings: | |
| User Name: admin | |
| Password: admin | |
| Enable DHCP: Yes (if WAN cable is plugged in) | |
| IP address: 192.168.1.1 | |
| Domain Name: (Blank) | |
| Subnet Mask: | 255.255.255.0 |
| DNS Server 1: | 192.168.1.1 |
| DNS Server 2: | (Blank) |
| SSID: default |
|
30 | Chapter 5: Troubleshooting |