English

Hardware installation

CAUTION! Computer components are extremely sensitive to electrostatic discharge (ESD). Before handling any components, be sure to wear an anti-static wrist strap (not included) and touch the computer case, to release any static electricity from your body.

Preparation

Before you proceed, make sure that you have all the components that you plan to install in the DiGiMatrix system.

Basic components to install

1.Hard disk drive (HDD)

2.Central processing unit (CPU)

3.DDR Dual Inline Memory Module (DIMM)

Removing the top cover

1.On the rear panel, locate the two

screws that secure the top cover to the

chassis.1

2. Use a Phillips (cross) screw driver to remove the top cover screws. Keep the screws for later use.

3.Pull the top cover slightly toward the rear panel until the side tabs are

 

disengaged from the chassis.

3

 

 

4.

Hold the center edge of the top cover,

 

 

then lift it up from the chassis. Set the

 

 

top cover aside.

2

4

6

ASUS DiGiMatrix (AB-V10)