Asus E1470 Installing a DIMM, Replacing the top cover

Installing a DIMM

1.Locate the two DIMM sockets on the motherboard.

2.Unlock a socket by pressing the retaining clips outward.

3.Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.

4.Firmly insert the DIMM to the socket until the retaining clips snap back in place and the DIMM is properly seated.

CAUTION! A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.

Replacing the top cover

1.Position the front edge of the top cover at least two inches from the front panel cover. Fit the top cover tabs with the chassis rail and the front panel cover tabs.

2.Lower the rear edge of the top cover as shown.

3.Push the top cover slightly toward the front panel until it fits in place.

4.Secure the top cover with two screws.

2

1 2

3

4

4

Tabs

1

2

3

3 4

4

English

Quick Setup Guide 9