South Bridge Overheat Protection [Auto]

Allows yous to enable/disable the southbridge overheat auto-protection function or set the temperature over which the system shuts down.

Configuration options: [Auto] [70C] [80C] [Disabled]

OPT_TEMP2 Overheat Protection [Disabled]

If you monitor a device temperature using a thermal sensor cable connected to the OPT_TEMP2 connector, you can use this item to set the temperature over which the system shuts down or disable this function.

Configuration options: [Disabled] [50C] [60C] [70C] [80C] [90C]

OPT_TEMP1 Overheat Protection [Disabled]

If you monitor a device temperature using a thermal sensor cable connected to the OPT_TEMP1 connector, you can use this item to set the temperature over which the system shuts down or disable this function.

Configuration options: [Disabled] [50C] [60C] [70C] [80C] [90C]

CPU Fan and Chassis Fan

 

BIOS SETUP UTILITY

 

 

Power

 

 

 

 

 

 

CPU Fan Speed

 

 

 

 

CPU Fan Speed

[4411RPM]

CPU Q-Fan Control

[Disabled]

Chassis Fan 1 Speed

[N/A]

Chassis Fan 2 Speed

[N/A]

Chassis Fan 3 Speed

[N/A]

Chassis Q-Fan Control

[N/A]

Chassis Fan 4 Speed

:N/A

Select Screen

Select Item

+- Change Field

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]

The onboard hardware monitor automatically detects and displays the CPU fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A.

CPU Q-Fan Control [Disabled]

Allows you to enable or disable the CPU Q-Fan controller.

Configuration options: [Disabled] [Enabled]

Chassis Fan 1/2/3 Speed [xxxxRPM] or [Ignored] / [N/A]

The onboard hardware monitor automatically detects and displays the chassis fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A.

4-32

Chapter 4: BIOS setup