2.7.2I/O shield and LCD Poster Installation
1.Install the I/O shield to the chassis rear panel. Orient the I/O shield so that the openings of the ports fit the motherboard rear ports. Snaps the I/O shield into place.
2.Position the motherboard I/O side toward the chassis rear panel and install the motherboard to the chassis.
Be cautious when installing the I/O shield. The I/O shield edge springs may damage the I/O ports.
3.Thread the LCD Poster cable through the opening until its stopper snaps into place.
4.Plug the LCD Poster cable into the onboard connector labeled LCD_CON.
5.This photo shows the LCD Poster installed. Place the device wherever you can monitor the screen.
ROG Blitz Formula |