5.3Intel® Rapid Storage Technology enterprise SATA/SSATA Option ROM Utility

The Intel® Rapid Storage Technology enterprise SATA/SSATA Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.

Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have set the correct jumper settings of the motherboard, and have set the correct SATA mode in the BIOS setup. You can refer to the Installing hard disk drives, Setting Jumpers, and Setting the RAID mode sections in BIOS for more information.

To launch the Intel® Rapid Storage Technology enterprise SATA/SSATA Option ROM utility:

1.Turn on the system.

2.During POST, press <Ctrl>+<I> to display the utility main menu.

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023

Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.

 

 

[ MAIN MENU ]

 

 

1. Create RAID Volume

3. Reset Disks to Non-RAID

 

2. Delete RAID Volume

4. Exit

 

RAID Volumes:

[ DISK/VOLUME INFORMATION]

 

 

 

None defined.

 

 

 

Physical Disks:

Serial #

Size

Type/Status(Vol ID)

ID

Drive Model

0

ST3300656SS

HWAS0000991753TR

279.3GB

Non-RAID Disk

1

ST3300656SS

37VN00009846RAJ1

279.3GB

Non-RAID Disk

2

ST3300656SS

397600009846UEDY

279.3GB

Non-RAID Disk

3

ST3300656SS

GWC50000991756G6

279.3GB

Non-RAID Disk

 

 

 

 

 

[

]-Select

[ESC]-Exit

 

[ENTER]-Select Menu

The navigation keys at the bottom of the screen allow you to move through the menus and select the menu options.

The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.

5-24

Chapter 5: RAID configuration