5.When asked if you will load additional RAID controller drivers, select No, then press <Enter>.

More Driver Disks?

Do you wish to load any more

driver disks?

 

Yes

No

6.Follow the onscreen instructions to finish the OS installation.

7.When the installation is completed, DO NOT click Reboot. Press <Ctrl> + <Alt> + <F2> to switch to the command-line interface from graphic user interface.

8.Type the following commands when using a Legacy floppy.

mkdir /mnt/driver

mount /dev/fd0 /mnt/driver cd /mnt/driver

sh replace_ahci.sh reboot

6-6

Chapter 6: Driver installation