1.9Onboard LEDs

1.Standby Power LED

The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.

SB_PWR

F2A85-M2

ON OFF

Standby Power Powered Off

F2A85-M2 Onboard LED

2.POST State LEDs

The POST State LEDs provide the status of the following key components during POST (Power-On-Self-Tests): CPU, memory modules, VGA card, and hard disk drives. If an error is detected on any of these components, the corresponding LED will stay lit until the problem is resolved.

DRAM_LED

 

CPU_LED

F2A85-M2

VGA_LED

 

BOOT_DEVICE_LED

F2A85-M2 CPU / DRAM / VGA / BOOT_DEVICE LED

1-30

Chapter 1: Product introduction