2.7Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change the fan settings.
2.7.1CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures.
2.7.2CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select Ignore if you do not wish to display the detected speed.
2.7.3CPU Q-Fan Control [Enabled]
[Disabled] | Disables the CPU |
[Enabled] | Enables the CPU |
Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU
Fan Profile [Standard]
This item appears only when you enable the CPU
[Standard] | Sets to [Standard] to make the CPU fan automatically adjust depending on |
| the CPU temperature. |
[Silent] | Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. |
[Turbo] | Sets to [Turbo] to achieve maximum CPU fan speed. |
[Manual] | Sets to [Manual] to assign detailed fan speed control parameters. |
|
|
| The following four items appear only when you set CPU Fan Profile to [Manual]. |
|
|
| Fan Upper Temperature [70] |
| Use the <+> and |
| The values range from 20ºC to 90ºC. |
| Fan Max. Duty Cycle(%) [100] |
| Use the <+> and |
| values range from 40% to 100%. When the CPU temperature reaches the |
| upper limit, the CPU fan will operate at the maximum duty cycle. |
ASUS |