Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).
Configuration options: [Enabled] [Disabled]
Change Settings Auto]
This item appears only when you set the previous item to [Enabled] and allows you to select the Serial Port base address.
Configuration options: [Auto] [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.5.9APM
Deep S4 [Disabled]
[Disabled] | Prevents Deep S4 state from switching off all power. |
[Enabled] | Allows the BIOS to switch off all power at Deep S4 state to conserve |
| power. When Enabled, waking up the system via peripheral devices are not |
| available. System will only wake up by pushing the power button. |
WOL (include AC Power Loss) [Disabled]
[Disabled] | Disables Wake On LAN after a power failure. |
[Enabled] | Wake On LAN after a power failure (G3 state). |
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Keyboard [Disabled]
[Disabled] | Disables the Power On by a PS/2 keyboard. |
[Space Bar] | Sets the Space Bar on the PS/2 keyboard to turn on the system. |
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. | |
[Power Key] | Sets Power key on the PS/2 keyboard to turn on the system. This feature |
| requires an ATX power supply that provides at least 1A on the +5VSB lead. |
ASUS |