1 Chapter

5.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

 

AGND NC SENSE1 RETUR

 

SENSE2 RETUR

AGND NC NC

NC

 

AAFP

 

 

 

 

 

PORT1L PORT1R PORT2R

SENDSENSE

PORT2L

PIN 1

 

H87-PRO

MIC2 MICPWR outLineR NC Lineout L

 

HD-audio-compliant

Legacy AC’97

 

pin definition

compliant definition

H87-PRO Front panel audio connector

• We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

• If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]; if you want to connect an AC’97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD].

6. Serial port connectors (10-1 pin COM)

The connector is for a serial (COM) port. Connect the serial port module cable to the connector, then install the module to a slot opening at the back of the system chassis.

COM

 

 

RXD DTR DSR CTS

 

 

 

 

 

 

 

 

 

 

PIN 1

DCD TXD GND RTS RI

 

 

H87-PRO

H87-PRO Serial port (COM) connector

The serial port bracket (COM) is purchased separately.

1-20

Chapter 1: Product introduction