PS/2 Keyboard and Mouse Support [Auto]
Select any of these settings when PS/2 keyboard and mouse are installed. These | ||
settings only apply when Fast Boot is enabled. | ||
[Auto] |
| For a faster POST time, PS/2 devices will only be available when |
|
| the system boots up or rebooted when the PS/2 devices have not |
|
| been reconnected or changed. If you disconnect or change PS/2 |
|
| devices before restarting the system, PS/2 devices will not be |
|
| available and BIOS setup program will not be accessible via PS/2 |
[Full Initialization] | devices. | |
For full system control, PS/2 devices will be available during | ||
[Disabled] |
| POST at any circumstances. This process will extend POST time. |
| For the fastest POST time, all PS/2 devices will not be available | |
|
| until your computer enters the operating system. |
Network Stack Driver Support [Disabled] | ||
[Disabled] |
| Select to skip the network stack driver from loading during POST. |
[Enabled] |
| Select to load the network stack driver during POST. |
Next Boot after AC Power Loss [Normal Boot] | ||
[Normal Boot] | Returns to normal boot on the next boot after an AC power loss. | |
[Fast Boot] | Accelerates the boot speed on the next boot after an AC power loss. |
Boot Logo Display [Enabled]
[Enabled] | Display the boot logo during POST. |
[Disabled] | Hide the logo during POST. |
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
Boot Logo Size Control [Auto] | |
This item appears only when you set the Boot Logo Display item to [Enabled]. | |
[Auto] | Automatically adjust the boot logo size according to Windows® |
[Full Screen] | requirements. |
Display the boot logo in full screen. |
3 Chapter
Chapter 3: BIOS setup |