1.7.3 Installing a DIMM

Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components.

Follow these steps to install a DIMM.

1.

Locate the DIMM sockets in the

DDR DIMM notch

 

motherboard.

 

 

2.

Unlock a DIMM socket by pressing

 

 

the retaining clips outward.

 

 

3.

Align a DIMM on the socket such that

 

 

the notch on the DIMM matches the

 

 

break on the socket.

Unlocked Retaining Clip

 

 

 

 

A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.

4.Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.

Locked Retaining Clip

1.7.4 Removing a DIMM

Follow these steps to remove a DIMM.

1.Simultaneously press the retaining clips outward to unlock the DIMM.

Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.

2. Remove the DIMM from the socket.

ASUS K8V-VM Motherboard

1-13