Asus K8V-VM ASUS K8V-VMMotherboard, K8V-VMATX Power Connector, K8V-VMSpeaker Out Connector, 5.ATX power connectors (24-pinEATXPWR, 4-pinATX12V)

5.ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors fit completely.

•Do not forget to connect the 4-pin ATX +12V power plug; otherwise, the system does not boot up.

•Make sure that your ATX 12V power supply can provide 12A on the +12V lead and at least 1A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 300 W, or 350 W for a fully configured system.

The system can become unstable or will not boot up if the power is inadequate.

		ATX12V	EATXPWR
	+12V DC	+12V DC	+3 Volts	Ground
			+12 Volts	+5 Volts
K8V-VM	GND	GND	+12 Volts	+5 Volts
		+5V Standby		+5 Volts
			Power OK	-5 Volts
			Ground	Ground
			+5 Volts	Ground
r			Ground	Ground
			+5 Volts	PSON#
			Ground	Ground
			+3 Volts	-12 Volts
K8V-VM ATX Power Connector			+3 Volts	+3 Volts

6. Speaker out connector (4-pi n SPE AKE R)

This connector is for the case-mounted speaker and allows you to hear system beeps and warnings.

VM-K8V

r

SPEAKER

1

Speak +5VGNDGNDOut

K8V-VM Speaker Out Connector

ASUS K8V-VM Motherboard 1-23