Red Hat® Enterprise Linux OS 4.7/4.8

To install the RAID controller driver when installing Red Hat® Enterprise OS:

1.Boot the system from the Red Hat® OS installation CD.

2.At the boot:, type linux dd.

3.Press <Enter>.

-To install or upgrade in graphical mode, press the <ENTER> key.

-To install or upgrade in text mode, type: linux text <ENTER>.

-Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue] boot: linux dd

4.Select Yes using the <Tab> key when asked if you have the driver disk, then press <Enter>.

Main Menu

Do you have a driver disk?

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Yes

 

 

 

 

No

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.Press <Enter> to continue.

Insert Driver Disk

Insert your driver disk into /dev/sda and press “OK” to continue.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK

 

 

 

Cancel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.Select No and press <Enter> to continue.

More Driver Disks?

Do you wish to load any more driver disks?

YesNo

6-8

Chapter 6: Driver installation