2.7.2Internal connectors

1.Serial ATA connectors

(7-pin SATA1, SATA2, SATA3, SATA4; RED) (7-pin SATA5, SATA6; Black)

Supported by the AMD® SP5100 chipset, these connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 3Gb/s of data transfer rate.

If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1,

RAID 10, or RAID 5 configuration.

The actual data transfer rate depends on the speed of Serial ATA hard disks installed.

2-32

Chapter 2: Hardware information