Installing SCSI

Drivers4

4.1 Windows 95/98

To install Windows 98 from your CD-ROM drive, you will need to update the Windows 95/98 startup disk that came with your Windows 98 CD. You need to do this on a system that has DOS, Windows 95, or Windows 98 already installed.

1.Create a Windows 95/98 Startup disk if one is not provided with your Windows 95/98 CD.

2.Copy aspi8u2.sys and aspicd.sys from the ASUS support CD to the Windows 95/98 Startup disk.

Fresh Windows 95/98 Installation From Floppy Disk
1.Restart your computer with the startup disk in the floppy disk drive.

2.When the Windows 95/98 Startup menu is displayed, select Start computer with CD-ROM support and press <Enter>.

3.Insert the Windows 95/98 CD into the CD-ROM drive, switch to your CD-ROM driver letter and type setup.

Follow the on-screen instructions to continue Windows 95/98 Setup. Setup will run and restart your computer. If you are given an option, always select 1. Start Windows 98 Setup from CD-ROM. Windows installation will continue for some time.

4.When you see the Add New Hardware Wizard screen and PCI SCSI Bus Controller is displayed, click Next.

5.Select Search for best driver, then click Next.
6.Select Specify a location and type:

e:\SCSI\win95 or e:\SCSI\win98 in the space provided. Insert the ASUS support CD. Click Next.

7.When you see the Adaptec Ultra160 PCI SCSI Controller click Next.
8.When you see the following message:

Windows has finished installing the software that your new hardware device requires. Click Finish.

9.If you are prompted to reboot the system, select No if you have a dual-channel adapter or if you have multiple Ultra160 adapters. Then repeat Steps 5 through 9 for each SCSI channel until all Ultra160 adapters are found. Otherwise, select Yes to reboot the system.

10.Follow the on-screen instruction to complete the Windows 98 installation.

NOTE: Refer to the Ultra160 Family Manager Set User’s Guide (see ASUS support CD) for more information on installing SCSI drivers.

4. Driver Installation

Chapter 4 Installing SCSI Drivers

21