2.2.4Managing Arrays
The LSI Corporation MPT Setup Utility allows you to perform other tasks related to configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties:
1.On the main menu, select RAID Properties.
| LSI Corp Config Utility |
| v6.20.00.00 (2007.12.04) |
| ||||
| Adapter Properties |
|
|
|
|
| ||
|
| Adapter |
|
| SAS1064E |
| ||
|
| PCI Slot |
| 20 |
|
| ||
|
| PCI Address(Bus/Dev/Func) | 02:00:00 |
|
| |||
|
| MPT Firmware Revision |
|
| ||||
|
| SAS Address |
|
| 500E0188:01111705 |
| ||
|
| NVDATA Version |
|
| 2D.02 |
| ||
|
| Status |
|
| Enabled |
| ||
|
| Boot Order |
| 0 |
|
| ||
|
| Boot Support |
|
|
| [Enabled BIOS & OS] |
|
|
|
|
|
|
|
|
|
|
|
|
| RAID Properties |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SAS Topology |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Advanced Adapter Properties |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu | F1/Shift+1 = Help |
| |||||
| Enter = Select Item |
| ||||||
|
|
|
|
|
|
|
|
|
2.On the next screen that appears, select View Existing Array.
| LSI Corp Config Utility |
| v6.20.00.00 (2007.12.04) | |
|
| |||
| Select New Array Type | |||
|
| View Existing Array | View the existing configuration. | |
|
|
|
| Create Integrated Mirror Array of 2 |
|
| Create IM Volume |
| |
|
|
|
| disks plus up to 2 optional hot spares. |
|
|
|
| Data on the primary disk may be migrated. |
|
|
|
|
|
|
| Create IME Volume |
| Create Integrated Mirrored Enhanced |
|
|
|
| Array of 3 to 10 disks including up |
|
|
|
| to 2 optional hot spares. |
|
|
|
| ALL DATA on array disks will be DELETED! |
|
|
|
| Create Integrated Striping array of |
|
| Create IS Volume |
| |
|
|
|
| 2 to 10 disks. |
|
|
|
| ALL DATA on array disks will be DELETED! |
|
|
|
|
|
| Esc = Exit Menu | F1/Shift+1 = Help | ||
Enter = Choose array type to create
ASUS PIKE 1064E |