3.1.2Windows® Server 2003 OS

During Windows® Server 2003 OS installation

To install the RAID card driver when installing Windows® Server 2003 OS:

1.Boot the computer using the Windows® Server 2003 OS installation CD. The Window® Setup starts.

2.Press <F6> when the message “Press F6 if you need to install a third party SCSI or RAID driver...” appears at the bottom of the screen.

Windows Setup

Press F6 if you need to install a third party SCSI or RAID driver...

3.The next screen appears. Press <S> to specify an additional device.

Windows Setup

Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices(s):

<none>

*To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.

*If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

3-4

Chapter 3: Driver installation