2.2.5Viewing SAS topology

1.From the Adapter Properties screen, select SAS Topology.

 

LSI Corp Config Utility

 

v6.20.00.00 (2007.12.04)

 

 

Adapter Properties -- SAS1064E

 

 

 

 

 

 

 

Adapter

 

 

SAS1064E

 

 

 

PCI Slot

 

20

 

 

 

 

PCI Address(Bus/Dev/Func)

02:00:00

 

 

 

 

MPT Firmware Revision

 

1.24.00.00-IR

 

 

 

SAS Address

 

 

500E0188:01111705

 

 

 

NVDATA Version

 

 

2D.02

 

 

 

Status

 

 

Enabled

 

 

 

Boot Order

 

0

 

 

 

 

Boot Support

 

 

 

[Enabled BIOS & OS]

 

 

 

 

 

 

 

 

 

 

 

 

 

RAID Properties

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SAS Topology

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Advanced Adapter Properties

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Esc = Exit Menu

F1/Shift+1 = Help

 

 

Enter = Select Item

-/+/Enter = Change Item

 

 

 

 

 

 

 

 

 

 

Press <Alt+D> to display device properties, or <Alt+M> to display more keys.

More keys for the SAS Topology display:

C = Clear Device Mappings for Non-Present Devices R = Refresh SAS Topology

Enter = On a SAS Enclosure or Expander - Expand or Collapse Item

Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)

2.Information about the volume and its member-disks are then displayed.

 

LSI Corp Config Utility

v6.20.00.00 (2007.12.04)

 

 

SAS Topology -- SAS1064E

 

 

 

 

 

Device Identifier

Device

 

 

SAS1064E(02:00:00)

 

Info

 

 

﹂ Enclosure

 

Direct Attach Devices

Controller

 

 

﹂ IM VOL

 

LSILOGICLogical Volume 3000

 

 

 

 

 

 

 

 

 

 

Esc = Exit

F1/Shift+1 = Help

 

 

 

Alt+D = Device Properties

Alt+M = More Keys

 

 

 

 

 

 

 

 

 

2-16

Chapter 2: RAID configuration