I RQ-xx assi gned to [ PCI Devi ce]

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved]

2.4.5 USB Confi gurati on

The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the configuration options.

USB Configuration

Module Version - 2.24.0-11.4

USB Devices Enabled:

None

USB 1.1

Controller

[Enabled]

USB

2.0

Controller

[Enabled]

Legacy USB Support

[Enabled]

USB

2.0

Controller Mode

[HiSpeed]

USB Mass Storage Device Configuration

The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None.

USB 1.1 Controll er [Enabl ed]

Allows you to enable or disable the USB 1.1 Controller.

Configuration options: [Enabled] [Disabled]

USB 2.0 Controll er [Enabl ed]

Allows you to enable or disable the USB 2.0 Controller.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Enabl ed]

Allows you to enable or disable support for USB devices on legacy operating systems (OS). Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controll er Mode [Hi Speed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed]

ASUS M2N-MX SE

2-27